| Customization: | Available |
|---|---|
| After-sales Service: | Instruction for Commissioning and Maintenance |
| Warranty: | 12 months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
High-pressure density separator separates material into higher density fraction and lower density fraction. When treating MSW,C&D waste and stale waste, it can always separate out the certain material by control of the air volume. High-pressure density separator is a necessary machine when producing RDF from MSW.
The high-pressure density separator is composed of a centrifugal fan, a separating unit with a rotating drum, a belt conveyor, and a connected settling chamber.According to the aerodynamic principle, the device uses air as the sorting medium to sort the MSW according to the density and the particle under the action of the airflow. The lighter materials (such as paper sheets, plastic bags, films, etc.) are carried up or horizontally to a farther place, while heavy materials are dropped by the updraft that cannot support them. In this way, material is separated by different density.
The charging conveyor is a high-speed belt conveyor to evenly distribute the materials on itself to enhance the separating effect.
The settling chamber is made of 3mm galvanized steel plate, which has the effect of anti-corrosion and anti-pressure.
The air volume, wind speed and wind pressure at the fan outlet can be adjusted by the frequency converter.
The exhaust duct is equipped with an interface that can be connected to the deodorizing system.
By 2018, JONO has undertaken more than 80+ EPC Projects, which are distributed in more than 40 cities . Our equipment is capable of handling more than 50,000 tons of waste every day.Through persistence and accumulation, we have the proprietary knowledge of total solutions in eight segments, including Municipal Solid Waste (MSW), organic waste, decoration waste, construction waste, recyclables, bulky waste, industrial waste and landfill waste.
LOCATION SINGAPORE
APPLICATIONMUNICIPAL SOLID WASTE
CAPACITY 600T/D
This project with the treatment capacity of 600t/d is set for a fine sorting of MSW before they were sent to the CFB (circulating fluidized bed) for incineration. Specifically, JONO introduces the Lindner shredding technology and adopts two-stage shredding process in this project to shred the combustible materials into 80 mm fuel (SRF) so as to enhance the complete combustion rate and mitigate the pressure of treating the exhaust gas. Besides, the mechanical sorting process is also applied in this project to sort out ferromagnetic metals, in-combustibles (glass, stone, ash, etc.) and combustibles.
The first pilot plant at Singapore to treat the non-source sorted waste, it includes pre-treatment, bio-drying and post-treatment, within the pre-treatment, HDPE, LDPE,PP and MIX PET will be sorted out, the remains will be sent to bio-drying box, after 8-9days, the water content will be reduced from 45% to 25%. After the post treatment,ferrous, non-ferrous and inert could be separated. Eventually the calorific value of RDF will be increased from 1000kcal/kg to 3800kcal/kg, which could reach the EU standard Class III. This MBT plant is focusing on recycling and RDF production, a good reference case for the idea of " waste to value".
LOCATION APPLICATION CAPACITY VIETNAM MUNICIPAL SOLID WASTE 1,000T/D
Mixed MSW is a general term for recyclable waste, organic waste, hazardous waste, combustible waste, etc.
Jono has independently developed the MSW mechanical biological treatment (MBT) technology, and launched the automatic disposal scheme of waste classification and treatment smart factory. After the intelligent separation of mixed MSW, the disposal path for products includes: Aerobic/Anaerobic fermentation to produce high-quality biological fertilizer; plastic granulation; production of high calorific value refused derived fuel RDF.
JONO was founded in 2006 and is located in Wujiang District, Suzhou. The company has a floor area of 25,000 square meters, more than 80 design researchers, more than 200 employees and more than 150 patents. It is a new landmark of Wujiang enterprise, also a national high-tech enterprise, has been rated as a waste sorting leader for four consecutive years by the industry association.
For more infomation,pls click on the following link:
https://jonogroup.en.made-in-china.com/company-Suzhou-Jono-Environmental-Technology-Co-Ltd-.html
){kind=link}