| Customization: | Available |
|---|---|
| After-sales Service: | Instruction for Commissioning and Maintenance |
| Warranty: | 12 months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Strong Breeze Series AI robotic sorter are widely used in construction and decoration waste, recyclable waste, bulky waste and other handle systems. It has the characteristics of fast and wide range of sorting. It can realize the identification and sorting of various materials such as fabrics, plastic drums, wood blocks/boards, shoes, metal, foam, glass bottles, etc. at the same time. The rich sample database can realize the rapid switching of product application scenarios.
|
Number of robots
|
2 |
|
Lifting tool
|
clamp jaw |
|
Sorting accuracy
|
over 90% |
|
Maximum sorting speed
|
4000 times/hour/2 robots
|
|
Maximum sorting size(L*W*H)
|
1000 mm*500 mm*200 mm
|
|
Minimum sorting size(L*W*H)
|
50 mm*50 mm*10 mm
|
|
Working range/robot
|
2000 mm*2300 mm
|
|
Width of conveyor belt
|
1.6m |
|
Belt speed
|
0.1 - 1 m/s
|
|
Maximum sorting weight
|
≤30 kg
|
|
Reference weight(2 robots)
|
5000 kg (without belt and base)
|
|
Dimension(2 robots)
|
L 9 m,W 3.2 m
|
|
Power(2 robots)
|
20 kw
|
|
Nominal voltage
|
380Va.c. 50/60HZ
|
|
Working pressure
|
4 - 6 bar
|
|
Air consumption
|
200 l/min
|
|
Noise level
|
<80 dB
|
|
Work environment
|
Operating temperature 0ºC~40ºC,Working humidity
<=95%(non condensing),Protection class IP65
|
Strong Breeze series AI robotic sorter and Light Breeze series AI robotic sorter can be applied to various solid waste disposal systems such as domestic waste, food waste, kitchen waste, recyclable waste, construction and decoration waste, industrial waste, etc., which can realize the Impurity removal and purification and the recovery of high-value materials.
rich sample database, innovative intelligent image recognition technology, combined with the self-developed algorithm model for complex materials such as overlapped, damaged and stains, greatly improves the recognition accuracy rate, making the sorting rate over 96% .
Compared with traditional sorting robots, the energy consumption is reduced by 10% and the operation and maintenance costs are reduced by 10%.
The simple operation interface can quickly switch and select different material database, which can realize the simultaneous sorting of multiple materials.
The efficient motion control system ensures the high-speed and stable operation of the equipment.
Comparing to traditional sorting robots, our innovative duplex structure robots are saving 20% space and reducing 30% equipment investment costs.
The ability of self-learning in the cloud can realize remote diagnosis and smart upgrade.
By 2018, JONO has undertaken more than 80+ EPC Projects, which are distributed in more than 40 cities . Our equipment is capable of handling more than 50,000 tons of waste every day.Through persistence and accumulation, we have the proprietary knowledge of total solutions in eight segments, including Municipal Solid Waste (MSW), organic waste, decoration waste, construction waste, recyclables, bulky waste, industrial waste and landfill waste.
LOCATION SINGAPORE
APPLICATIONMUNICIPAL SOLID WASTE
CAPACITY 600T/D
This project with the treatment capacity of 600t/d is set for a fine sorting of MSW before they were sent to the CFB (circulating fluidized bed) for incineration. Specifically, JONO introduces the Lindner shredding technology and adopts two-stage shredding process in this project to shred the combustible materials into 80 mm fuel (SRF) so as to enhance the complete combustion rate and mitigate the pressure of treating the exhaust gas. Besides, the mechanical sorting process is also applied in this project to sort out ferromagnetic metals, in-combustibles (glass, stone, ash, etc.) and combustibles.
The first pilot plant at Singapore to treat the non-source sorted waste, it includes pre-treatment, bio-drying and post-treatment, within the pre-treatment, HDPE, LDPE,PP and MIX PET will be sorted out, the remains will be sent to bio-drying box, after 8-9days, the water content will be reduced from 45% to 25%. After the post treatment,ferrous, non-ferrous and inert could be separated. Eventually the calorific value of RDF will be increased from 1000kcal/kg to 3800kcal/kg, which could reach the EU standard Class III. This MBT plant is focusing on recycling and RDF production, a good reference case for the idea of " waste to value".
LOCATION APPLICATION CAPACITY VIETNAM MUNICIPAL SOLID WASTE 1,000T/D
Mixed MSW is a general term for recyclable waste, organic waste, hazardous waste, combustible waste, etc.
Jono has independently developed the MSW mechanical biological treatment (MBT) technology, and launched the automatic disposal scheme of waste classification and treatment smart factory. After the intelligent separation of mixed MSW, the disposal path for products includes: Aerobic/Anaerobic fermentation to produce high-quality biological fertilizer; plastic granulation; production of high calorific value refused derived fuel RDF.
JONO was founded in 2006 and is located in Wujiang District, Suzhou. The company has a floor area of 25,000 square meters, more than 80 design researchers, more than 200 employees and more than 150 patents. It is a new landmark of Wujiang enterprise, also a national high-tech enterprise, has been rated as a waste sorting leader for four consecutive years by the industry association.
For more infomation,pls click on the following link:
https://jonogroup.en.made-in-china.com/company-Suzhou-Jono-Environmental-Technology-Co-Ltd-.html
YOU MIGHT INSTERESTED IN FOLLOWING QUESTIONS
1. Are you manufacturer or trading company?
We are a professional recycling machines manufacturer for more than 15years we supplying full technical support and solutions, timely and professional service, always effort on quality, honest, win-win business for every client.
2. How do you assistant to install the machine on worksite?
We are experienced on more than 80 projects, engineer and technicians will assistant client on construction, installation, commissioning.
3. How can I get spare parts for replacement in other countries?
Wearing parts like blades, it is necessary to buy with machine, other parts in stock could be delivery out by express if urgent or by sea within 5days.
4. Can I use mark machine with different LOGO and color?
Yes, please confirm details with sales.
If you have any need ,pls feel free to contact us.
){kind=link}